Basic Info.
Model NO.
UHF Four Port Reader
Power Supply
DC 9V-24V
Communication
RS232, RS485, Wiegand26,TCP/IP/WiFi
Frequency
865~868MHz, 902~928MHz (EU&Us )
RF Power
30 dBm Adjustable
Transport Package
Size: 30*23*13cm(Us)
Specification
Size: 305*305*70mm
Trademark
Focus RFID
Origin
Shenzhen
HS Code
8471900090
Production Capacity
10, 000, 000 PCS/Year
Product Description
UHF Four Port Reader
(Impinj R2000 Chip)
(Impinj R2000 Chip)
General Descriptions
ST-8604 is high performance UHF Long range RFID Reader integrated with Impinj R2000 module with excellent reading performance. The reading distance up to 10 meters. It supports fast tag read/write with high identification rate. The reader is widely used in RFID system such as logistics, vehicle access control, and anti-counterfeit and industrial production process control system.
Technical Specifications
- Integrated Impinj R2000 reading module
- Protocol: ISO18000-6B, ISO18000-6C(EPC C1G2)
- Work Frequency :865~868MHz, 902~928MHz frequency band(EU&US standard or customization);
- FHSS or Fix Frequency transmission;
- RF output power 30dbm in Max (adjustable);
- Built-in 8dBi antenna with effect distance up to 10m;
- Power supply: DC +9V-24V
- Communication: RS232/RS485/Wiegand26/TCP/IP
- Size: 305*305*70mm
- Free SDK and demo software is provided
Absolute Maximum Rating
| ITEM | SYMBOL | VALUE | UNIT |
| Power Supply | VCC | 16 | V |
| Operating Temp. | TOPR | -10~+60 | ºC |
| Storage Temp. | TSTR | -20~+75 | ºC |
Under TA=25ºC,VCC=+9V unless specified
| ITEM | SYMBOL | MIN | TYP | MAX | UNIT |
| Power Supply | VCC | 8 | 9 | 12 | V |
| Current Dissipation | IC | 800 | 1500 | mA | |
| Frequency | FREQ | 902 | 902~928 | 928 | MHz |
| Size | Size | 310×210×41 | mm |
INTERFACE
1.Power J1
| No. | Symbol | Comment |
| 2 | PWR | +9VDC |
| 4 | GND | Ground |
| 1,3 | NC | Reserved |
3. USB J3 (Slave)
4. USB J4 (Reserved)
5. CPIP RJ45 Socket J5
6. UART J6 (RS232 DB9 Female)
| No. | Symbol | Comment |
| 1 | NC | Reserved |
| 2 | TXD | Data output in RS232 |
| 3 | RXD | Data input in RS232 |
| 4 | NC | Reserved |
| 5 | GND | Ground |
| 6 | NC | Reserved |
| 7 | NC | Reserved |
| 8 | NC | Reserved |
| 9 | NC | Reserved |
| No. | Symbol | Comment |
| 1 | Output1 | General output1 |
| 2 | Output2 | General output2 |
| 3 | Output3 | General output3 |
| 4 | Output4 | General output4 |
| 5 | Input1 | General Intput1 with Internal 47k resistor pulled-down to ground |
| 6 | Input2 | General Intput2 with Internal 47k resistor pulled-down to ground |
| 7 | Input3 | General Intput3 with Internal 47k resistor pulled-down to ground |
| 8 | Input4 | General Intput4 with Internal 47k resistor pulled-down to ground |
| 9 | TGIN | Trigger input with internal 10k resistor pulled-up to +5V |
| 10 | R+ | R+ in RS485 |
| 11 | R- | R- in RS485 |
| 12 | GND | Ground |
| 13 | NC | Normal-Close terminal of internal relay |
| 14 | NO | Normal-Open terminal of internal relay |
| 15 | CM | Common terminal of internal relay |
9.LED indicator
| Symbol | Comment |
| POWER | Power on indicator |
| RUN | Command-executing indicator |
| TAG | Tag-detected indicator |
| WIRELESS | WiFi active indicator |
| ALARM | Alarm indicator |
| 1~9 | RSSI indicator |
