- Overview
- FEATURES
- Product Parameters
- Detailed Photos
- Certifications
- Exhibition Show
- Shipping
- FAQ
Basic Info.
Product Description
FSAN Multi-People Body Fever Temperature Scanner Non-Contact Infrared Thermometer Camera
--Thermal imaging + visible light in one of the camera
--Thermal imaging body temperature measurement (without black body)
--Real-time temperature measurement, multi-objective synchronous automatic measurement
--Intelligent over-temperature alarm, rapid screening and tracking of temperature anomalies
--Resolution up to 2M(1920x1080@30fps)
--Support low bit rate, low latency, ROI area of interest enhanced coding
--Support multi-line OSD, font, size, color, position adjustable
--Support 3D digital noise reduction and WDR
--Support automatic electronic shutter function, adapt to different monitoring environment
--Support a variety of intelligent alarm linkage output
--Support Onvif access
--Support Email, FTP and NTP services
--Supports HTTPS encrypted transport
--Change the password when starting the initial equipment to ensure the security of the password
--Support 2-way alarm input / 1-way alarm output
--Support Micro SD card (128G) local storage
--Support PoE power supply
| Model | TFW6633IHZ85A |
| Thermal Camera | |
| Detector Type | Uncooled LWIR module |
| Effective Pixels | 384×288 |
| Pixel Size | 17μm |
| Spectral Range | 8-14μm |
| NETD | < 60mk(@25°C,F#=1.0, 300K, 50Hz) |
| Lens | 9.1mm(13 millimeter optional) |
| Angle of view | 39°×30° |
| F NO. | 1.2 |
| Frame rate | 40Hz |
| Color Palettes | Black-Heat /White-Heat/Rainbow etc. |
| Visible Camera | |
| Image sensor | 1/2.8"SONY starlight CMOS |
| Min. Illumination | 0Lux/F1.4(IR on)Color:0.01Lux/F1.4, B/W:0.001Lux/F1.4 |
| Min. Illumination | 5m |
| Electronic shutter | Electronic shutter(1/5~1/100000) |
| Day/ Night | ICR switch, auto, color, B/W, ext |
| Lens | 6mm lens |
| Lens interface | M12 |
| S/N ratio | ≥50db (AGC OFF) |
| WDR | WDR(Off/ Low/ Middle/ High) |
| 3D N/R | Off/ Low/ Middle/ High/ Higher |
| Defog | Off/ Low/ Middle/ High |
| Image setting | Brightness, Contrast, Saturation, Sharpness, Hue |
| Video compression | H.265/H.264 |
| H.265 Encoding | Main Profile |
| H.264 Encoding | BaseLine / Main Profile / High Profile |
| Encoding features | NTSC: main stream1920X1080@30fps,, sub-stream: D1@30fps PAL: main stream: 1920X1080@25fpss, sub-stream: D1@25fps |
| Max. Resolution | 1920X1080 |
| Video bit rate | Constant bit rate, variable bit rate (16kbps~8000kbps) |
| Video type | Complex stream/ Video stream |
| Audio compression | G.711u |
| Audio bit rate | 64Kbps |
| Audio control | Support output volume gain control |
| ROI | Support 8 zones, multi-stage level |
| NETWORK | |
| Network protocol | TCP/IP,UDP,HTTP,DHCP,RTSP,DDNS,NTP,PPPoE,UPnP,SMTP,FTP |
| Access protocol | ONVIF |
| Browser | Support IE 11 |
| Video preview meanwhile | 2 user |
| User permission | User add/ modify/ delete, permission management |
| Safe mode | Authorized user name and password, HTTPS encryption and AES link encryption, RTSP verification |
| Motion detection | Set detection zone, Multi-level sensitivity can be set |
| Tampering alarm | 1 zone |
| Privacy Mask | 4 zones |
| Intelligent analysis | face detect,mask detect |
| Event linkage | Snapshot, TF card video, FTP upload or Email, alarm output linkage, preset linkage |
| ANR | Support, match with NVR |
| Mobile surveillance | Support Apple, Android |
| Device exception detection | Support network disconnected, IP conflict, illegal access alarm |
| OSD | Title, time and date overlay, multi-line OSD, OSD color optional |
| Snapshot | Support snapshot, snapshot resolution is encoding resolution |
| System update | Support remote update |
| TEMPERATURE MEASUREMENT | |
| measurement distance | 2-5m(Suggest 3 meter) |
| Accuracy | ±0.3ºC(with blackbody) |
| Measurement range | 30-45ºC |
| Detection target | 10 person |
| Mask detect | Support, alarm prompt without mask |
| Face detect | Support for multi-target face detection, temperature measurement |
| Temperature alarm | Support high temperature alarm |
| Temperature monitor | Support fast easy installation |
| Data upload | Support snapshot image, temperature data upload |
| INTERFACE | |
| Network interface | RJ45 10M/100M network adaptative |
| Audio | Built-in audio output, support External audio input |
| Alarm input | 2CH |
| Alarm output | 1CH |
| Sound and light alarm | Built-in white light lamp and speaker |
| RS485 | Support |
| TF card | Max.support 128G local-storage |
| Reset | Support |
| GENERAL | |
| Operating temperature | -10°C ~ 50°C (Thermometry temperature: 10-32ºC) |
| Operating humidity | 0%-90% |
| Power supply | DC12V/POE |
| Power consumption (max) | <10W(Typical operating power: 6W) |
| Dimensions(mm) | 315.15mm*48.44mm*71.26mm |
-DIMENSION-
-INTERFACE-
2-power
3-RJ45
4-RS485/alarm output
5-alarm input
6-NC
We will arrange the delivery within 3-5 days after we receive your payment.
Q: 1. Support sample order?
Yes, we support sample order for customer to test before bulk order place.
Q: 2. What is the lead time?
For sample order need 3-5days, for bulk order time can be negotiate.
Q: 3. Do you have any MOQ limit?
Sample order is no limit, but for bulk order once you need customized logo print or customized package then it will have MOQ limit.
Q: 4. How do you ship the goods and how long does it take arrive?
For sample order, usually we shipped by DHL, FedEx, UPS or TNT.
For bulk order, usually we shipped by customer appointed forwarder by air, by sea or by train.
Q: 5. What is the warranty for the products?
Our warranty is for 2 years.
Q: 6. How is your after-selling service?
We support online technical support.
Any problem with our product can contact us to solve problems at any time.
Q: 7. Do you supply OEM service?
Yes, we are professional OEM/ODM manufacturer.
We support customized logo print on products, customized package, customized GUI_language.
