The UAV detection system is a low altitude security system that uses cognitive radio Protocol Cracking (CRPC) technology to solve the detection, identification and positioning of domestic and foreign civil UAVs. The system can passively detect, accurately identify, distinguish between friend and foe, and provide early warning and prediction for unmanned aerial vehicles in protected areas (with optional direction finding functions as needed). It can be used for low altitude security defense in airports, prisons, important industrial facility bases, sports venues, and major event venues.
CRPC technology is the fourth generation UAV defense method. This technical means monitors the radio environment in the defense area through the antenna array, collects radio signals in the defense area 24 hours a day, transmits the collected signals to the signal processing unit, accurately demodulates and decodes the UAV signals, and then transmits the analyzed UAV signals to the data server through the network, The data server manages the received drone signals uniformly, detects and alerts the "black flying" drones, and manages the drone black and white list based on the electronic fingerprint ID.

Detailed Photos

WIDEBAND JAMMING

Note:The detection range is the recognition distance, and the detection  performances are values under typical working conditions in open and unobstructed conditions.

Mechanical Characteristics

1. UAV suitcase detection device
processing unit
Contents	Data
Length	165mm
Width	85mm
Height	49mm
Mainhost weight	≤600g
Note: The above size is the shape size of the detection box under the closed state;

Stable Characteristics

RF Characteristics

  Device deployment

Choose a wide-view field outdoors and start deploying equipment. Before the equipment is unfolded for use, check the specifications and quantities of all accessories and standard parts according to the equipment list, and assemble them step by step according to the installation steps below.

The usage environment of the device Select a wide-view field outdoors, and turn on the equipment for use. Usually choose outdoor open land or the top of the building, when using it need to pay attention to whether there are obvious obstructions around and buildings with strong interference

equipment.
 

Antenna connection

The receiving band antenna is screwed clockwise to the radio processing unit according to the corresponding interface identified on the antenna and the radio host unit. Note: Different equipment may be slightly different, when connecting the antenna, you must use the equipped antenna and the radio host unit to connect, otherwise the system will cause damage to the radio host unit after it is turned on.

Power and network access

Network access : The device supports linking wireless networks or placing 4G cards to link 4G

networks;

Power Access: The device has a built-in lithium battery, which can be charged through the original power adapter and Type-C charging interface cable; DC12V DC input, can be accessed by fixed power supply or mobile power supply;
 

Description of the accusation system

The device host has a built-in budget processing unit and supports loading the

accusation platform system, supports access and control of other device browsers in

the LAN, supports multi-screen and multi-device monitoring, but does not support

third-party system environments.
 

Operating instructions

( 1 ) System starting

After the equipment is powered on, the display interface automatically starts the UAV

defense system and enters the main interface of the defense system, and the main

page is divided into three functional areas: menu operation area, electronic map area,

and information display area, as shown in Figure 3-1;

Image1The main interface of the UAV defense system
 

Pay attention : After entering the system, the main interface of the system does not display the electronic map, it is displayed as a white screen, at this time, the functional controller of the device is in the startup state and the search GPS needs to respond for a period of time (about 20-30s);

Passive detection and positioning

After the device detects the drone, the system will automatically send out an alarm, and at the same time, display the drone, pilot (remote control) logo and approximate location in the electronic map area; the information display area at the bottom of the interface displays the detected drone's brand, Model, electronic ID (serial number), flight frequency, flight altitude, latitude and longitude, intrusion direction, reference

distance, and pilot (remote controller) latitude and longitude, intrusion direction, reference distance and other information.

1.UAV information display

As shown in Figure 3-2, the UAV information display box is displayed in turn as follows: UAV brand, electronic ID (airframe serial number), flight frequency, flight altitude, latitude and longitude, intrusion direction, reference distance; Pilot (remote control) latitude and longitude, intrusion direction, reference distance;

1. The current quantity of detected drones

Display the total number of drones currently detected by the device;

2. The number of drones detected in history

Display the number of drones detected by the device in the recent period, and multiple time periods can be set (within 30 minutes, within 1 hour,

within 2 hours, within 4 hours, within 8 hours, within 24 hours and all history);

 

Basic Troubleshooting

a) Confirm that the main unit of the device is turned on and whether the built-in battery of the device is still charged;

b) Make sure that the antennas of all devices are firmly connected to the corresponding ports;

c) Make sure the power cable is not damaged or frayed;

d) Reboot the device and check if the problem persists;

e) After the device is turned on, confirm whether the "device management" process (controller, computing engine, sensor) in the server interface is working normally.

f) If the fault still cannot be rectified, please contact our technical staff, and do not disassemble the case without permission.
 

Precautions for use

a) After confirming that the detection antenna of the device is connected normally, it can be powered on. It is strictly forbidden to use the power before the detection antenna is installed.

b) In order to ensure the service life of the equipment, the minimum power of the equipment in daily use should not be less than 10%;

c) In order to use the device safely, it must be charged when the device is turned off. The charging time is ≯ 6 hours. After the device is fully charged, the device can be used after unplugging the power supply;

d) Do not use the device while charging, in case the device overheats and causes the battery to explode;

e) In order to ensure the normal operation of the equipment, it is strictly forbidden to install other software that has nothing to do with the operating system on this terminal, such as software system problems caused by the random installation of software by customers are not covered by the warranty.

f) Do not insert and use external U disks, mobile hard disks, etc. on the device side, and do not change the date and time of the system casually

g) This product is highly technical equipment. If the system breaks down during use, you should notify our company's after-sales service department in time. Do not disassemble it at will, so as not to damage the internal structure or damage your rights and interests due to improper operation.

h) Please use this product within the scope permitted by national laws and regulations. Any adverse consequences caused by violation of laws and regulations shall be borne by the customer

Each main spare part into air box. Can deliver directly with air box, or adding additional wooden package.

Delivery means:  By Express / Air / Sea.

We help our customers to choose the most appropriate anti-drone products based on clients´ requirements and type and size of location or facility that has to be protected. We are constantly searching for new anti-drone technologies to enhance our list of anti-drone products.

Why Choose Us